AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSTALLATION (2008 Sequoia)

Last Modified: 11-29-2007		1.6 A
Service Category: Audio/Visual/Telematics	Section: Audio/Video
Model Year: 2008	Model: Sequoia	Doc ID: RM000002ZY1005X
Title: AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers)

(a) Connect the connector.

(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.

Torque: 7.0 N·m (71 kgf·cm, 62 in·lbf)

NOTICE:

Do not touch the cone part of the speaker.
When installing the speaker to the instrument panel, be careful that the wires do not get caught between the parts.

2. INSTALL NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for 14 Speakers)

(a) Engage the 6 clips and 2 claws to install the speaker panel.

3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH

(a) Connect the speaker connector.

(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.

Torque: 7.0 N·m (71 kgf·cm, 62 in·lbf)

NOTICE:

Do not touch the cone part of the speaker.
When installing the speaker to the instrument panel, be careful that the wires do not get caught between the parts.

4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY LH

(a) Connect the speaker connector.

(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.

Torque: 7.0 N·m (71 kgf·cm, 62 in·lbf)

NOTICE:

Do not touch the cone part of the speaker.
When installing the speaker to the instrument panel, be careful that the wires do not get caught between the parts.

5. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

(a) Engage the 4 clips and claw to install the speaker panel.

6. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

(a) Engage the 4 clips and claw to install the speaker panel.